have you tried sending the liteon erase command in jf?
I need help un bricking it. i have the lastest verson of i prep . All i know is something went wrong after the erase and before the write. My drive is blank . It won't read it or let me write anything to it . i have the key , dummy bin and mcd some thing file . so can some one please tell me what to do ?
have you tried sending the liteon erase command in jf?
Larry Joyner (07-18-2012)
If its status 80 its either not connected/powered or blank, if its refusing to intro and status 51 or 52 then your looking at a partialy flashed drive. The erase command is the only thing that will get you out of this.
Unplug everything and re-boot
Lave the drive discuneccted for a good 10 minuets
Connect usb pro
Load jungleflasher
Plug in drive
Dont intro just send the liteon erase command a good 5 to 10 times
Now hit into and power cycle the drive
If this does not work eject (manualy if you have to) the drive about 2-3 inches and repleate everything above.
Depending on how much of the firmware was written you might be able to wipe it if not you can try this...
Tutorial if your Liteon freezes during erase
Or you can send to me and Ill crack that nut for sure![]()
Premium UK Flashing / jtag / RGH services Manchester
Jungleflasher
Molex PC Power dvd cable + PMT probe
Xbox Backup creator
abgx
Winbond wire
Open Tray or Play DVD error?Don't say thanks click thanksPosts:1,000 Got there in the end!
Larry Joyner (07-18-2012)
Thank you . i got it .