Thread: LiteON bricked?

Originally Posted by dm106

Hi guys, i think im f*cked. I Was updating a Liteon Drive dg-16d4s (slim xbox)with 0225 fw to lt+ 3.0, when at the begging of the process (Writing Bank 0 ....) my pc reset on its own. Now JF doesnt recognize the drive and turning the xbox on doesnt want to open tray. At least i managed to save the key before. It is anything i can do? Wow my hands are shaking.. Hope you can help me.

Your drive isn't bricked, there's no firmware on the drive since the flashing process got interrupted. Load your dummy.bin as source and 3.0 as your target. Put the drive into vendor mode and write the firmware again.

Originally Posted by PhoenixKevin

Your drive isn't bricked, there's no firmware on the drive since the flashing process got interrupted. Load your dummy.bin as source and 3.0 as your target. Put the drive into vendor mode and write the firmware again.

yep happened to me to i had the same symptoms and rewriting the drive fixed it . i did have alittel trouble getting my pc to find it again but i managed to get it working

Originally Posted by PhoenixKevin

Your drive isn't bricked, there's no firmware on the drive since the flashing process got interrupted. Load your dummy.bin as source and 3.0 as your target. Put the drive into vendor mode and write the firmware again.

yeap follow this. havent had this happen to me personally but my friend did something like this and called me to come fix it lol...

lol i love how scared people get when something goes wrong :P but ive been there plenty of times so i know the feeling.

page 204 of jungle flasher will tell you

If its not going into vendor mode blast it a few times with the lite-on erase button refreshing each time you will get there...

Originally Posted by dm106

my pc reset on its own.

also pc rebooting on it own more than likely its a bad ram stick
had the same problem few months back tested the ram it was bad and after i replaced it pc runs like a top