Have you tried to flash your drive?
PLEASE! I need some help my xbox 360 middle light keeps blinking green and its nothing to do with the magnets or anything or the drive connection because i have replaced the sata and power cables twice to no result and also the dvd drive ejects once the xbox is turned on and before it turns off and it does not stay in long enough for a disk to be read PLEASE SOME ONE HELP!
and did you happen to do the open tray trick to flash it?
yes when i first tried to flash it my self i powered the dvd drive (liteon 93450c) using the xbox open tray trick i kept pulling out the power from the dvd drive to keep the tray half open now it just ejects its self once turned on or off.
someone else flashed my drive so i dunnoOriginally Posted by Slick
yesOriginally Posted by Tim Scott
Is it my xbox 360 or my liteon drive that is causing the problem as i cannot see any problems with the xbox 360 motherboard no fuses have burnt I really dont know what is wrong or is it because i failed on the open tray trick whilst using my 360 as the power source? SOMEONE PLEASE EXPLAIN MORE PLEASE
It's probably your drive. Like Slick said, check your trace cuts for continuity with a multimeter. Also make sure your power and SATA cable are plugged in properly. It might also be a bad flash, so if none of the above solutions work, try flashing again.
what i have recently found out after some tests is that it is not the dvd drive because i tested another dvd drive in the xbox 360 and the light was still blinking and the tray was still ejecting so im almost certain that it is the xbox itself(motherboard) but im lost on what to do now.Originally Posted by jaws95678