iXtreme LT+ Lite Touch Xbox 360 Drive Firmware Flashing
Results 1 to 7 of 7
  1. #1
    Learning the Ropes
    Join Date
    Apr 2009
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Green light just blinks, drive will not open, MS28

    I got an xbox from a guy who could not fix it. I do not have the orig files of any dvd key. I heard someone say Sammys are unbrickable. I hope this is true.
    I hooked up the drive to my pc, went into jungle flasher, and hit intro /device and it went into vendor mode. It had 1.4 on it, I installed LT 1.0 thinking it would fix the issue. It did not fix the problem, I went back into JF and I see that it reads that it has been flashed. LT1.0 Shows up as MS28, so I think I have some kind of chance to get it working again.
    Any help MUCH appreciated. If you tell me to grab some info and post it, I will do so VERY QUICKLY.
    Thanx
    Jess

  2. #2
    Learning the Ropes
    Join Date
    Apr 2009
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Green light just blinks, drive will not open, MS28

    Also, I bought a new drive on eBay swaped out the circuit board, and it still does not work. I just need this to open the drive, so I can play games. I stuck a paper clip in the dvd rom to open the tray, and then I put a cd in it, and I did not hear it spin up. It just says "close tray" or "open tray" one or the other
    THanx again,
    Jess

  3. #3
    Learning the Ropes
    Join Date
    Dec 2010
    Posts
    62
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Green light just blinks, drive will not open, MS28

    is the drive a ms25 or ms28?
    when you said you put it into vendor mode did you extract the key?
    is the drive thats in it the original drive with the correct key?

    usually when console blinks it cant find drive so check sata and power cable are plugged in properly.

    if you used a ck3 pro to power drive does it eject?

    you said you bought a new drive, i take it another sammy?
    does the laser actually work in the drive?

    try and spoof a working drive to test the key off the original sammy and if it still dont work the key cant be correct on the drive.


    let us know how you get on.

  4. #4
    Learning the Ropes
    Join Date
    Apr 2009
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Green light just blinks, drive will not open, MS28

    The drive is MS28
    I put the drive into vendor mode by pressing the intro / device button (because it will not open, I cannot get the tray half open)
    The drive that is in IS the original PCB Board, I replaced the guts, but kept the circuit board the same.
    I was able to extract a key, the flashing process to LT 1.0 from 1.4 went fine I assume, because after the flash I went back into JF and it said it was LT 1.0.
    Before and after the flash the green light just blinks, and the drive does not open. I checked all the connections, but I got the xbox for FREE because the drive would not open. That is why I bought a 2nd drive, but it was messed up in a flashing process before I got it. I just heard sammy's are unbrickable, so I was hoping to get some info on how to get this sammy MS28 to open up. I downloaded the LT 1.0 sammy firmware, and that is what I upgraded the drive to 48 hours ago.
    I do not use ck3 pro, so I cannot get it to eject.
    I bought another drive, and identical sammy, and then I pulled out the circuit board and put in the orig circuit board (since the xbox motherboard and dvd rom are "married" I have heard, you have to keep orig circuit boad.
    I do not know if the laser actualy works in the drive. I manualy eject the drive with a paper clip, put in a cd, and I do not hear it spin up.
    I do not know how to spoof a working drive to test the key off the orignal smamy.
    I can follow instructions
    Thanx for the help

  5. #5
    Learning the Ropes
    Join Date
    Dec 2010
    Location
    Ottawa Area, Ontario, Canada
    Posts
    87
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Green light just blinks, drive will not open, MS28

    Green blinking light means the motherboard can't find the drive. Replace the sata cable in the 360 with the sata cable that you've used to flash the drive with and see if the green light goes away and drive works.


    Jtag and Flash Service
    New jtagged/flashed xbox 360 Pro Consoles (Complete)for sale. Seal was opened only to do the hack.
    Refurbished Falcon and Xenon jtagged consoles only for sale

  6. #6
    Newbie
    Join Date
    Dec 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Green light just blinks, drive will not open, MS28

    I stuck a paper clip in the dvd rom to open the tray, and then I put a cd in it, and I did not hear it spin up.
    Anything one man can imagine, tote bags other men can make real.

  7. #7
    Learning the Ropes
    Join Date
    Apr 2009
    Posts
    16
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Green light just blinks, drive will not open, MS28

    I replaced the cable, no change. I think it started to give off the RROD error when I did that lol. Who knows. I am selling all 4 broken 360's I have for $99 OBO on craigslist. No need to try to help on this issue. I'm selling it, I think it's bricked. I also have no clue.
    Thanx

Similar Threads

  1. Flashing green power light.Drive cant close.
    By sabrax in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 7
    Last Post: 01-23-2013, 03:35 PM
  2. Liteon Drive Keeps Ejecting, Green Light Flashing
    By SquareGravy in forum Open Forum
    Replies: 1
    Last Post: 07-10-2012, 06:07 PM
  3. Samsung MS28 - Middle Green Light keep blinking in Vendor Mode
    By xcraft in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 4
    Last Post: 10-05-2011, 12:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
1e2 Forum