As long as there from Singapore then either will do
I am about to place a order for disc my choices are mmk-001 or mmk-003? Does any recommend one more than the other?
It should tell you in description whether they're made in Singapore. 8x write speed is 003 and 2.4x is 001
Sent from my iPhone 4S using Tapatalk
25 VERBATIM DUAL LAYER DISCS 8X 8.5GB 240MINS PRINTABLE | eBay
I used to get mine from this seller on ebay, they were always Singapore, but you could contact them just to make sure
Don't thank me, thank my THANKS button!!
i still get all my media from babz
never let me down yet
edit; op, damn, just look on ebay usa
CG Pro Gaming Tournaments
the above site is for single xbox live and psn players
looking to join teams and take part in online battles and tournaments
I would get them from amazon or newegg. Sometimes newegg will have a deal on them. I have ordered from both and they have always been from Singapore. Try to get the AZO type. I think the MKM-003 are best but I have still had a few burns fail when I use either type. I am currently using newegg MKM-003s and haven't had a bad burn for a long time. From what I have seen, if you get MKM-003s, 8x, you can be pretty sure they are from Singapore. A lot may have to do with your settings too. It may depend on your setup.
I think the last ones I got were from newegg, Model#: 97000.
I have also used amazon, Model#: 96542.
I haven't tried them but if you want the MKM-001s you could try amazon Model#: 96577.
I haven't tried printables so I don't know about them.
My sweet spot settings for MKM-001s and MKM-003s are as follows:
Smart Burn checked
Force Hyper Tuning checked
Over Speed Writing checked
Online Hyper Tuning checked
Clear OPC History before every burn. (Haven't been doing this lately and I seem to get as good
or better results.)
Tools > Settings > Write
Perform OPC Before Write checked
Enable BURN-Proof unchecked
Layer Break (For DL Media) Calculate Optimal
Tools > Settings > Verify
Process Priority: Realtime
Tools > Settings > I/O > Page 2
Buffer Size 200 MB or as high as your system can handle
Always select verify on the main Write image file to disc page under Destination.
Make sure your computer is defraged.
Burn in safe-mode.
Burn at 4x.
Remove the spike checked
set Speed to 4x
Run in safe-mode.
Verify that data is within these specs:
PI MAX should be 100 or less & PI Average should be 5 or less
PIF MAX should be 4 or less & PIF Average should be 0.20 or less
Last edited by escreate; 09-05-2012 at 11:24 AM.