iXtreme LT+ Lite Touch Xbox 360 Drive Firmware Flashing
Results 1 to 5 of 5
  1. #1
    A Helping Hand
    Join Date
    Aug 2012
    Posts
    27
    Thanks
    0
    Thanked 0 Times in 0 Posts

    iHas 324-98b and XGD3 help ?

    i have a iHas 324-98b flashed with burner max and burned about 20 odd games with memorex (Disc ID: MBIPG101-R10-65) with ease my settings stayed the same and didnt change i woke up the next morning ready to burn ufc 3 and it failed which is even funnier cause its not xgd3 atleast i believe so...well i reflashed my iHas redid all settings etc... etc... and have went through easily a 25 ina half packs of memorex discs with all failed burns at %50 on XGD2 and 3 games which is weird to me...as a matter of fact 1's failing right now as i type lol.... help !!!!

    and heres the newest of many failed attempts....

    I 00:58:54 ImgBurn Version 2.5.7.0 started!
    I 00:58:54 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
    I 00:58:54 Total Physical Memory: 2,096,568 KB - Available: 1,297,704 KB
    I 00:58:54 Initialising SPTI...
    I 00:58:54 Searching for SCSI / ATAPI devices...
    I 00:58:54 -> Drive 1 - Info: ATAPI iHAS324 B AL1B (J (USB)
    I 00:58:54 Found 1 DVD±RW/RAM!
    I 01:01:29 Operation Started!
    I 01:01:29 Source File: G:\games\Max.Payne.3\Disc1\Max.Payne.3.dvd
    I 01:01:29 Source File Sectors: 4,267,015 (MODE1/2048)
    I 01:01:29 Source File Size: 8,738,846,720 bytes
    I 01:01:29 Source File Volume Identifier: DVD_ROM
    I 01:01:29 Source File Volume Set Identifier: 5b7cc000MS UDFBridge
    I 01:01:29 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
    I 01:01:29 Source File Implementation Identifier: Microsoft CDIMAGE UDF
    I 01:01:29 Source File File System(s): ISO9660, UDF (1.50)
    I 01:01:29 Destination Device: [0:0:0] ATAPI iHAS324 B AL1B (J (USB)
    I 01:01:29 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65)
    I 01:01:29 Destination Media Supported Write Speeds: 4x, 6x, 8x
    I 01:01:29 Destination Media Sectors: 4,267,040
    I 01:01:29 Write Mode: DVD
    I 01:01:29 Write Type: DAO
    I 01:01:29 Write Speed: 6x
    I 01:01:29 DVD+R DL Reserve Track: No
    I 01:01:29 Link Size: Auto
    I 01:01:29 Lock Volume: Yes
    I 01:01:29 Test Mode: No
    I 01:01:29 OPC: Yes
    I 01:01:29 BURN-Proof: Disabled
    I 01:01:29 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)
    I 01:01:29 Book Type Setting: DVD-ROM
    I 01:01:29 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: No, SmartBurn: Yes
    I 01:02:06 Optimal L0 Data Zone Capacity: 2,133,520
    I 01:02:06 Optimal L0 Data Zone Method: Copied From Original Disc
    I 01:02:06 Set L0 Data Zone Capacity Succeeded!
    I 01:02:08 Filling Buffer... (512 MB)
    I 01:02:30 Writing LeadIn...
    I 01:02:44 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
    I 01:02:44 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
    I 01:02:44 Writing Layer 0... (LBA: 0 - 2133519)
    I 01:12:51 Writing Layer 1... (LBA: 2133520 - 4267014)
    W 01:14:08 Failed to Write Sectors 2134704 - 2134735 - Reason: No Additional Sense Information
    W 01:14:08 Retrying (1 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (2 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (3 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (4 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (5 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (6 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (7 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (8 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (9 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (10 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (11 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (12 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (13 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (14 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (15 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (16 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (17 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (18 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (19 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    W 01:14:10 Retrying (20 of 20)...
    W 01:14:10 Retry Failed - Reason: Invalid Address For Write
    E 01:14:15 Failed to Write Sectors 2134704 - 2134735 - Reason: No Additional Sense Information
    E 01:14:15 Next Writable Address: 2134126
    I 01:14:15 Synchronising Cache...
    W 01:14:20 User opted to skip the 'Close Track/Session/Disc' functions.
    E 01:14:20 Failed to Write Image!
    I 01:14:20 Exporting Graph Data...
    I 01:14:20 Graph Data File: C:\Users\steve0\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_MONDAY-AUGUST-20-2012_1-01_AM_MBIPG101-R10-65_6x.ibg
    I 01:14:20 Export Successfully Completed!
    E 01:14:20 Operation Failed! - Duration: 00:12:51
    I 01:14:20 Average Write Rate: 6,178 KB/s (4.5x) - Maximum Write Rate: 8,352 KB/s (6.0x)
    Last edited by Steve0813; 08-20-2012 at 12:16 AM.

  2. #2
    Legend
    Join Date
    May 2011
    Location
    Pasadena, TX USA
    Posts
    4,096
    Thanks
    47
    Thanked 566 Times in 513 Posts
    Here's the problem. You're burning too fast (6x). You still haven't been able to prove that the disks will complete an XGD2 in another burner since you don't need the ihas for that. And since the disks keep failing just after the layer break, it leads us to believe that the cheaply made MEMs are the issue. The answers haven't changed just because you started another thread. And they won't. You got your money's worth out of the first 20.

  3. #3
    Legend
    Join Date
    May 2011
    Location
    BC, Canada
    Posts
    1,393
    Thanks
    19
    Thanked 201 Times in 196 Posts
    I have some less expensive Maxell (comes up as RITEK) that I use for XGD2 and I have changed the speedcode in my firmware to burn them slower than normally allowable. The default slowest for them was 4x and I've dropped it down to 2.4x and it's made an improvement. Don't fool yourself thinking that the burn speed doesn't matter. Especially with more suspect media, the slower the burn, the fewer the problems.
    ALWAYS FLASH TO STOCK BEFORE ACCEPTING DASHBOARD UPDATES!!

    I will not give you "workaround" solutions. Do it right, or don't do it at all!

    Before asking questions... please take time to check out the following:
    iXtreme Search Page or Google

    What is kprobe you ask? Download it here


    New to iXtreme? Start here!

  4. #4
    A Helping Hand
    Join Date
    Aug 2012
    Posts
    27
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thank you guys for you help and input...

    my 1st 20+ burns were all avg speed 3.6 max speed 4.1 with the set speed to 4.0 and all have great reading in kprobe from my understanding and i successfully burn ufc 3 last night with the mems but its loads on my xbox and then goes black/blank so idk what it is lol

    and as for burning xgd2 on another burner i did try and it failed literally at 2% of the burn... i asked if i had to change settings no one has answered and the research comes back to no i do not have to but idc anyway i guess im ordering 60 verbs from singapore tomorrow after i fix these dudes xboxs and mod them...

  5. #5
    Legend
    Join Date
    Oct 2011
    Location
    Winchester, U.K.
    Posts
    3,073
    Thanks
    50
    Thanked 403 Times in 394 Posts
    If all the buffer settings in IMGBURN are maxed out and still failing then it has to be the PC that's giving you these problems! Stick it in Safe Mode and try just 1 burn to see if that helps! if not i would start looking at your PC memory or check the sata cables !
    We really don't like repeating ourselves. straight up!

    http://www.ixtreme.net/downloads-tut...tml#post209529 Using a 360 for flashing

    http://team-xecuter.com/forums/showthread.php?t=61768 Pot Tweaking

    http://www.ixtreme.net/uk-flashing-s...hire-area.html 360 Custom Firmware flashing from £10

    http://www.mediafire.com/download/3f...207-1-2014.rar All LTPlus and LTU firmware in one handy place.

Similar Threads

  1. I Have Burned XGD3 Without iHas
    By PeterNikolic in forum Open Forum
    Replies: 67
    Last Post: 09-09-2012, 01:11 PM
  2. Doubt about xgd3 and ihas
    By David Eric Valtorta in forum Open Forum
    Replies: 9
    Last Post: 08-19-2012, 09:55 AM
  3. is this ihas good for xgd3
    By muhannad in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 8
    Last Post: 02-16-2012, 02:33 PM
  4. xgd3 without ihas drive????
    By DeaddeamoN in forum Open Forum
    Replies: 13
    Last Post: 01-29-2012, 09:26 AM
  5. will this ihas burn xgd3
    By stevenc2012 in forum Open Forum
    Replies: 11
    Last Post: 12-26-2011, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
1e2 Forum