Burning XGD3 using iXtreme Burner MAX - Other Media

[ngilbert89]

I have installed the iXtreme Burner MAX custom firmware to my IHAS124, and I have managed to burn forza4 100% and verified at 100% with no errors the media I used was datawrite.

eBay - The UK's Online Marketplace
Would this be safe even though C4eva recommends Verbatim.

I am just bit confused as he said he has tried all other media and had errors but verbatim was the only 1 which was fine. Did he not try Datawrite then? Thanks.

[halogamer2145]

He said other media may work, but Verbatim is garaunteed to have no errors.

[ngilbert89]

would it be safe to play on xbox live even though it is not a Verbatim?

[halogamer2145]

would it be safe to play on xbox live even though it is not a Verbatim?

If it verified 100% then it should be fine, but if you want to be cautious then go with Verbatim.

[chr113]

i used arita ones and they worked great for me no errors

[EvgeniX]

I 23:26:57 Source File: D:\Downloaded Internet Files\Forza Motorsports 4

I like this one

[millimossburg]

WINDATA PREMIUM GOLD DL DISC PERFECT BURN NO ERRORS

I 20:41:26 Operation Started!
I 20:41:26 Source File: C:\Documents and Settings\Owner\Desktop\Disc 1\.3.Disc.1-XPG.dvd
I 20:41:26 Source File Sectors: 4,267,015 (MODE1/2048)
I 20:41:26 Source File Size: 8,738,846,720 bytes
I 20:41:26 Source File Volume Identifier: DVD_ROM
I 20:41:26 Source File Volume Set Identifier: 64ce0000MS UDFBridge
I 20:41:26 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 20:41:26 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 20:41:26 Source File File System(s): ISO9660, UDF (1.50)
I 20:41:26 Destination Device: [0:0:0] ATAPI iHAS124 B AL0S (F (ATA)
I 20:41:26 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64)
I 20:41:26 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 20:41:26 Destination Media Sectors: 4,267,040
I 20:41:26 Write Mode: DVD
I 20:41:26 Write Type: DAO
I 20:41:26 Write Speed: 4x
I 20:41:26 Link Size: Auto
I 20:41:26 Lock Volume: Yes
I 20:41:26 Test Mode: No
I 20:41:26 OPC: Yes
I 20:41:26 BURN-Proof: Enabled
I 20:41:26 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 20:41:26 Book Type Setting: DVD-ROM
I 20:41:26 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 20:41:57 Optimal L0 Data Zone Capacity: 2,133,520
I 20:41:57 Optimal L0 Data Zone Method: Copied From Original Disc
I 20:41:57 Set L0 Data Zone Capacity Succeeded!
I 20:41:57 Filling Buffer... (40 MB)
I 20:41:59 Writing LeadIn...
I 20:42:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 20:42:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 20:42:01 Writing Layer 0... (LBA: 0 - 2133519)
I 20:55:14 Writing Layer 1... (LBA: 2133520 - 4267014)
I 21:08:36 Synchronising Cache...
I 21:08:42 Closing Track...
I 21:08:43 Finalising Disc...
I 21:09:14 Exporting Graph Data...
I 21:09:14 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_SATURDAY-OCTOBER-22-2011_8-41_PM_UMEDISC-DL1-64_4x.ibg
I 21:09:14 Export Successfully Completed!
I 21:09:14 Operation Successfully Completed! - Duration: 00:27:48
I 21:09:14 Average Write Rate: 5,353 KB/s (3.9x) - Maximum Write Rate: 5,645 KB/s (4.1x)
I 21:09:14 Cycling Tray before Verify...
W 21:09:22 Waiting for device to become ready...
I 21:09:44 Device Ready!
I 21:09:44 Operation Started!
I 21:09:44 Source Device: [0:0:0] ATAPI iHAS124 B AL0S (F (ATA)
I 21:09:44 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: UMEDISC-DL1-64)
I 21:09:44 Source Media Supported Write Speeds: 4x, 6x, 8x
I 21:09:44 Image File: C:\Documents and Settings\Owner\Desktop\Disc 1\.3.Disc.1-XPG.dvd
I 21:09:44 Image File Sectors: 4,267,015 (MODE1/2048)
I 21:09:44 Image File Size: 8,738,846,720 bytes
I 21:09:44 Image File Volume Identifier: DVD_ROM
I 21:09:44 Image File Volume Set Identifier: 64ce0000MS UDFBridge
I 21:09:44 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 21:09:44 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 21:09:44 Image File File System(s): ISO9660, UDF (1.50)
I 21:09:44 Read Speed (Data/Audio): MAX / MAX
I 21:09:46 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 21:09:46 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 21:09:46 Verifying Layer 0... (LBA: 0 - 2133519)
I 21:16:04 Verifying Layer 1... (LBA: 2133520 - 4267014)
I 21:22:40 Exporting Graph Data...
I 21:22:40 Graph Data File: C:\Documents and Settings\Owner\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_SATURDAY-OCTOBER-22-2011_8-41_PM_UMEDISC-DL1-64_4x.ibg
I 21:22:40 Export Successfully Completed!
I 21:22:40 Operation Successfully Completed! - Duration: 00:12:54
I 21:22:40 Average Verify Rate: 11,040 KB/s (8.0x) - Maximum Verify Rate: 16,804 KB/s (12.1x)

[smig6]

The method of changing your disk burn speed worked great for me but i left opc on. The disc's im using are richohjpn-d01-67 they used to only burn at 4x now burn at 2.4x verify every time and load to hard drive.The program i use to change disc burn speed was (media code speed edit) Do not activate force ht and online ht as this does not work.
With this you can change the write speed of any disc.There is a tut somewhere telling you how to use this but i carn;t find it any more. Sorry. Big thanks to c4 for his ixtreme burner max firmware.

[TWITDADDY]

I was reading on c4eva speaks that a lot of people have had success with tdk-dl which is sweet because those disc are dirt cheap. Im not going to mess with them since i just bought a new spindle of verbs. But if your in need of disc might be worth a try

[R1c0]

disc one burned perfectly with OPC on 4x and verify also good.
But on disc 2 with the verifying it reported an error on 50%
And i can't install second disk to my HD it always give an error.
Also it frequenly says that my disc is damaged or something en i have to reboot game? how can u tell what kind of verbatims u have? I do have verbs but don't know if its MK001s of MK003s