While flashing a Benq Vad6038 with win 7 64bit. With a via card from ebay. Started Jungle Flasher found the drive. Clicked on Benq Unlock. worked. Clicked Read. worked. saved dummy file and others. Then clicked write an it just locked up??? Now has E64.
Would the tray open screw this up. I messed up I think. Kept the drive open half way turned off then turned back on an held half way again. I might be wrong again but was i suppose to pull any of the connectors off?
And what methods are there for recovery to still try to put on ixtreme?
Thank you
Sponsors
E64 on Benq write crash?
Moderators: jaws95678, Slick, Weirdjerz3y, blakey8
4 posts
• Page 1 of 1
E64 on Benq write crash?
by wyhlenout » Fri Apr 30, 2010 3:53 pm
- wyhlenout
- Posts: 6
- Joined: Thu Dec 10, 2009 2:09 pm
Re: E64 on Benq write crash?
by Slick » Sun May 02, 2010 4:22 am
Hi,
E64 / 1000
Description:
This error occurs if something goes wrong while flashing the drive or installing a modchip.A sign for it is that the dvd-drive doesnt eject the tray anymore.
DVD drive timed out during reset.
It can also be caused by a faulty DVD power or SATA cables
Known fixes:
1) Check the DVD power and SATA cable for damages and replace them if necessary.
2) If you have soldered a modchip to the drive recently make sure it is sinstalled properly otherwise the flash chip isnt powered.
3) The flash chip must be desoldered and reflashed with an external programmer, recover the dvd-key if you can (unless you have a backup)...
E64 / 1000
Description:
This error occurs if something goes wrong while flashing the drive or installing a modchip.A sign for it is that the dvd-drive doesnt eject the tray anymore.
DVD drive timed out during reset.
It can also be caused by a faulty DVD power or SATA cables
Known fixes:
1) Check the DVD power and SATA cable for damages and replace them if necessary.
2) If you have soldered a modchip to the drive recently make sure it is sinstalled properly otherwise the flash chip isnt powered.
3) The flash chip must be desoldered and reflashed with an external programmer, recover the dvd-key if you can (unless you have a backup)...
-
Slick - Posts: 2151
- Joined: Mon Sep 28, 2009 10:02 am
Re: E64 on Benq write crash?
by wyhlenout » Mon May 03, 2010 10:14 am
Thanks Slick. But that isn't the answer. Did searching for the similar problem on Google and other boards. Dosflash seems to be the only likely way to fix a bad flashed that has E64 on a Benq. Has anyone fixed this problem before with Dosflash? Thank you
- wyhlenout
- Posts: 6
- Joined: Thu Dec 10, 2009 2:09 pm
Re: E64 on Benq write crash?
by LtDan313 » Wed May 12, 2010 7:39 pm
I have done that before. Just use dosflash 32 and power cycle the drive when prompted to for your sata port. Then you should be able to write to it again.
-
LtDan313 - Posts: 57
- Joined: Wed May 12, 2010 7:15 pm
4 posts
• Page 1 of 1
Return to iXtreme LT Lite Touch Firmware Support
-
- Related topics
- Replies
- Views
- Last post
-
- BenQ powered off after erase, before write
by poison057 » Sun Jun 27, 2010 12:32 am - 3 Replies
- 185 Views
- Last post by esc0rtd3w
Sat Jul 03, 2010 3:51 am
- BenQ powered off after erase, before write
-
- ixtreme lt1.1 flashed ok, but still e64
by Rodjo » Fri Apr 30, 2010 4:30 am - 2 Replies
- 380 Views
- Last post by Rodjo
Fri Apr 30, 2010 5:24 am
- ixtreme lt1.1 flashed ok, but still e64
-
- Lite-On 74850C Will Not Write Firmware ?
by 92raver » Tue May 25, 2010 8:55 am - 4 Replies
- 212 Views
- Last post by 92raver
Tue May 25, 2010 2:26 pm
- Lite-On 74850C Will Not Write Firmware ?
-
- Xecuter LT Switch! Easier Read/Write
by Anemathis » Fri Jan 22, 2010 9:21 am - 2 Replies
- 1357 Views
- Last post by iamtheantihero
Fri Jan 22, 2010 5:52 pm
- Xecuter LT Switch! Easier Read/Write
-
- can't write lt fireware to drive in vendor mode
by iamtheantihero » Sat Jan 23, 2010 12:11 pm - 5 Replies
- 573 Views
- Last post by iamtheantihero
Sat Jan 23, 2010 1:48 pm
- can't write lt fireware to drive in vendor mode
Who is online
Users browsing this forum: Google Adsense [Bot], GUINNESS_DUMP, hevydani, Slick and 8 guests