Thread: Jtag 0.6690

Originally Posted by mitchem890

I'm not finding any downloads for it either. Is J-runner the same basically program?

I found a version 3 that works. Try links off YouTube.

As ICY says Jrunner does not have LPT support, but apparently you can use it once you have read the NAND to compare and create your modified NAND. I have not got that far myself!

I uploaded JTAG tool for you JtagToolSetup.exe. Make sure that it doesen't have any internet connections, disable it via firewall or disable your internet.

You are my hero! I just ordered the parts from amazon.
And I guess I should have asked this earlier but if my CB is un-exploitable according to here did i do all that work for nothing, or is there an updated version of this list.

I think the list still stands ... bit of a sickener if you get all that way and find you can't Jtag!

Originally Posted by Foxeye

I think the list still stands ... bit of a sickener if you get all that way and find you can't Jtag!

You can get the JTAG qsb's, that's a easy process if you want everything to be easy The LPT is a pain in the ass if you soldered bad though. All you can do like you mentioned is reading the nand with jtagtool and continue with J-Runner. But you will need to write 2 times after reading the nand and it's the ECC (for xell/xellous) And after that, the customized kernel.

Hmm do you know how common it is to encounter that issue?

Originally Posted by mitchem890

Hmm do you know how common it is to encounter that issue?

What issue?

The un-exploitable cb. Maybe I'm getting ahead of myself. I still have to wait a half a week for parts.

Oh, you mean the CB's ?
I think your's should work. To check what CB you have, you need to read the nand there's no other way.



Cause you haven't left it to MS repair right, that dash is WAY to old to have an un-exploitable CB.