LinkBack URL
About LinkBacks
Reply With Quotedisconnect the drive,press refresh and make sure do not close jf,if all is good do it again.
iXtreme LT+ Lite Touch Xbox 360 Drive Firmware Flashing
Results 1 to 10 of 19
-
01-15-2012, 09:48 PM #1A Helping Hand
- Join Date
- Nov 2011
- Posts
- 31
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Help! Write Verify Failed Slim 0225
Hello, I'm having problems writing lt + 3.0 to my drive. I have an MXIC, btw
Here is my log
Code:Sending Device ID request to port 0x0000 Manufacturer ID: 0xC2 Device ID: 0x11 Flash Name: MXIC(MX25L2005) Flash Size: 262144 bytes ............ Key: 42B50763FBE4D12FABF2CCB6464A0C2C is verified, Thanks C4eva Grabbing Key sector: ................ Key Sector verified. Grabbing Serial info: ........ Drive is Slim Lite-On.. Key found in KeyDB at record (2 - 0225) Key is: 42B50763FBE4D12FABF2CCB6464A0C2C Key has been tested and verified, thanks C4eva ! 0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS 0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S 0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............ 0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........ 0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 0060: 44 37 31 34 43 47 30 33 - 30 39 30 33 30 30 35 45 D714CG030903005E 0070: 38 20 20 20 8 0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 0010: 00 00 00 00 37 44 34 31 - 47 43 33 30 39 30 33 30 ....7D41GC309030 0020: 30 30 45 35 20 38 20 20 - 00 00 00 00 00 00 32 30 00E5 8 ......20 0030: 35 32 20 20 20 20 4C 50 - 53 44 20 20 20 20 47 44 52 LPSD GD 0040: 31 2D 44 36 53 34 20 20 - 20 20 20 20 20 20 00 00 1-D6S4 .. 0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 0060: 00 00 00 0F 00 40 00 04 - 00 02 06 00 00 00 00 00 .....@.......... 0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x....... 0090: 00 00 F8 00 10 02 00 00 - 02 02 00 00 60 00 40 00 ............`.@. 00A0: F8 00 10 02 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00B0: 3F 20 00 00 ? .. 0000: 44 37 31 34 43 47 30 33 - 30 39 30 33 30 30 35 45 D714CG030903005E 0010: 38 20 20 20 FF FF FF FF - 30 46 32 30 30 36 37 32 8 ....0F200672 0020: 31 36 37 38 31 35 58 58 - 41 30 FF FF 53 34 50 30 167815XXA0..S4P0 0030: 37 32 32 30 30 30 30 30 - 31 30 36 35 32 31 00 00 72200000106521.. 0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 41 30 FF FF ............A0.. Hashing Drive: ................ Dummy.bin file saved to Dummy.bin Loading firmware from buffer Inquiry string found Identify string found Drive key @ 0xA030 42B50763FBE4D12FABF2CCB6464A0C2C Firmware Osig: [PLDS DG-16D4S 0225] Firmware is: SlimKey Extract Key database updated Loading firmware file C:\Users\Patrick\Desktop\Firmware\Dummy.bin MD5 hash: 4e280a5fe2c640408cc74e7e43adc20b Inquiry string found Identify string found Drive key @ 0xA030 42B50763FBE4D12FABF2CCB6464A0C2C Firmware Osig: [PLDS DG-16D4S 0225] Firmware is: SlimKey Extract Loading firmware file C:\Users\Patrick\Desktop\Firmware\LTPlus-0225-v3.0.bin MD5 hash: 1a38d3a2a6519339599fa1866642c513 Genuine LT plus v3.0 Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Firmware Osig: [PLDS DG-16D4S 0225] Firmware is: LT-Plus 3.0 Spoofing Target DVD Key copied to target Key Sector copied from Source to Target Target is LT - ID strings not copied to Target Sending Vendor Intro to port 0x0000 Status 0x51 Re-sending Vendor Intro: ......... Serial flash found with Status 0x72 Sending Device ID request to port 0x0000 Spi Status: 0x00 Manufacturer ID: 0xC2 Device ID: 0x11 Flash Name: MXIC(MX25L2005) Flash Size: 262144 bytes Getting Status from port 0x0000 SPi flash found with Status 0x72 Sending Chip Erase to Port 0x0000 Erasing: Writing target buffer to flash Writing Bank 0: ................ Writing Bank 1: ................ Writing Bank 2: ................ Writing Bank 3: ................ ............ Flash Verification Test ! Reading Bank 0: ................ Reading Bank 1: ................ Reading Bank 2: ................ Reading Bank 3: ................ Dumped in 4114mS Write Verify Failed ! Getting Status from port 0x0000 Invalid Status 0x50 Sending Vendor Intro to port 0x0000 Serial flash found with Status 0x72 Sending Device ID request to port 0x0000 Spi Status: 0x00 Manufacturer ID: 0xC2 Device ID: 0x11 Flash Name: MXIC(MX25L2005) Flash Size: 262144 bytes Getting Status from port 0x0000 SPi flash found with Status 0x72 Sending Chip Erase to Port 0x0000 Erasing: Writing target buffer to flash Writing Bank 0: ................ Writing Bank 1: ................ Writing Bank 2: ................ Writing Bank 3: ................ ............ Flash Verification Test ! Reading Bank 0: ................ Reading Bank 1: ................ Reading Bank 2: ................ Reading Bank 3: ................ Dumped in 4079mS Write Verify Failed !
Last edited by xaxifer; 01-15-2012 at 10:00 PM.
-
01-15-2012, 09:54 PM #2Loyalist
- Join Date
- May 2011
- Location
- usa
- Posts
- 432
- Thanks
- 0
- Thanked 31 Times in 31 Posts
-
01-15-2012, 09:58 PM #3A Helping Hand
- Join Date
- Nov 2011
- Posts
- 31
- Thanks
- 0
- Thanked 0 Times in 0 Posts
It didn't work
But thanks for trying
-
01-15-2012, 10:08 PM #4Loyalist
- Join Date
- May 2011
- Location
- usa
- Posts
- 432
- Thanks
- 0
- Thanked 31 Times in 31 Posts
how did u connected the drive to your pc?
-
01-15-2012, 10:13 PM #5A Helping Hand
- Join Date
- Nov 2011
- Posts
- 31
- Thanks
- 0
- Thanked 0 Times in 0 Posts
I have the x360USB and cK3 PRo powering it
-
01-15-2012, 10:24 PM #6Loyalist
- Join Date
- May 2011
- Location
- usa
- Posts
- 432
- Thanks
- 0
- Thanked 31 Times in 31 Posts
are u in last dashboard? are you pcb unlocked or you are using a replacement board?
-
01-15-2012, 10:57 PM #7A Helping Hand
- Join Date
- Nov 2011
- Posts
- 31
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Yes Im at latest dashboard, and I am using a Sputnik switch
-
01-15-2012, 10:59 PM #8Loyalist
- Join Date
- May 2011
- Location
- usa
- Posts
- 432
- Thanks
- 0
- Thanked 31 Times in 31 Posts
why dont buy an matrix unlocked pcb, is gonna be easy .
-
01-15-2012, 11:29 PM #9A Helping Hand
- Join Date
- Nov 2011
- Posts
- 31
- Thanks
- 0
- Thanked 0 Times in 0 Posts
Im so close to flashing this bymyself so I dont think I will
-
01-15-2012, 11:35 PM #10Loyalist
- Join Date
- May 2011
- Location
- usa
- Posts
- 432
- Thanks
- 0
- Thanked 31 Times in 31 Posts
ok then good luck.
Similar Threads
-
verbatim verify failed at 54 percent
By EvilZombie in forum Open ForumReplies: 2Last Post: 10-29-2011, 03:13 PM -
Slim Liton 0225 key extraction failed
By Vivek Lsm in forum Xbox 360 TutorialsReplies: 0Last Post: 09-03-2011, 03:15 AM -
Write Verify Failed !
By facioukk in forum iXtreme LT+ Lite Touch Firmware Phat SupportReplies: 2Last Post: 05-05-2011, 11:47 AM -
please help....i get error: Write Verify Failed !
By lio_x in forum iXtreme LT+ Lite Touch Firmware Phat SupportReplies: 5Last Post: 11-28-2010, 02:04 AM -
BenQ "Write Verify Failed" NEED HELP Cannot Write to Drive
By peteyb in forum Archived iXtreme 1.61 Flashing SupportReplies: 2Last Post: 04-01-2010, 01:48 AM
Posting Permissions
Powered by vBulletin™
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
Content Relevant URLs by vBSEO
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
Content Relevant URLs by vBSEO
All times are GMT -5. The time now is 04:42 AM.
vBulletin 4.0 skin by CompleteVB
