iXtreme LT+ Lite Touch Xbox 360 Drive Firmware Flashing
Results 1 to 3 of 3
  1. #1
    Newbie
    Join Date
    Jun 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Phatkey extraction error.

    I recently purchased Team Xecuter x360usb pro and probe v3 and have my old revd board. I have successfully extracted the key from a 74850c (0251) using the PMT method, but am struggling to get it to work this time around.

    For your information: All apparatus are official Team Xecuter hardware; I am using Windows 7 64-bit; the X360usb board was updated to the latest firmware last week; I am powering the revD board via mains.

    What I can see: The x360usb is plugged into my laptop and the LED Laptop side is green and the LED dvd drive side is red. It begins green, but turns red when I enter Jungleflasher 0.1.86.

    Below is the log.



    JungleFlasher 0.1.86 Beta (267)
    Session Started Sat Aug 06 18:07:20 2011

    This is a Wow 64 process running on 2 x 64 bit CPUs
    portio64.sys Driver Installed
    portio64.sys Driver Started, thanks Schtrom !
    Found 2 I/O Ports.
    Found 0 Com Ports.
    Found 6 windows drives C: D: F: G: H: I:
    Found 3 CD/DVD drives D: F: H:

    XECUTER X360USB PRO attached.

    Drive is Lite-On..
    XECUTER X360USB PRO removed.

    XECUTER X360USB PRO attached.

    Drive is Lite-On..
    Drive is Lite-On..
    Sending Vendor Intro to port 0x0000
    Status 0x51
    Re-sending Vendor Intro:
    .......................
    Serial flash found with Status 0x52

    Extracted drive key failed Verification !


    PhatKey extraction failed!

    Some more information you should know, I cannot advance to "Serial flash found with Status 0x52" using the 3.3v switch, I have to manually power cycle the drive using the CK3 revd board. The instant I turn the power back on, "Serial flash found with Status 0x52" appears and I go to the next screen which asks me to power cycle the drive with a 5 second delay. No matter the delay I give the drive, I get "Extracted drive key failed Verification !" every single time.

    The DVD drive is 83850c v1 fully updated with stock firmware 0251.

    Any clues what I'm doing wrong?

  2. #2
    Legend
    Join Date
    Jun 2011
    Location
    USA
    Posts
    4,563
    Thanks
    4
    Thanked 766 Times in 749 Posts
    try using JF 1.84 - see what that gives you

    if it works - then just switch over to 1.86 to write

  3. #3
    Newbie
    Join Date
    Jun 2011
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I tried it on .84 as well, but it didn't work. I have managed to find the key which was extracted a fair few months ago, so I no longer have the problem of wishing to extract the key. But I am unsure if this error will occur on other DVD drives, or maybe it was resigned to this individual one. As I stated before, it worked without fault when I tried it on a 74850c (0251).

Similar Threads

  1. Extracted Drive Key Failed Verification, Phatkey Extraction Failed
    By jslabiak in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 15
    Last Post: 10-23-2011, 03:21 AM
  2. PhatKey Failed Error
    By Deeby in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 7
    Last Post: 08-19-2011, 03:51 AM
  3. Liteon 74850C PHATkey extraction failure
    By hitechseeker in forum Open Forum
    Replies: 6
    Last Post: 07-19-2011, 02:42 PM
  4. PhatKey extraction failed! Please Help!!!!!
    By yoseaweed in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 0
    Last Post: 06-27-2011, 01:35 PM
  5. Slim Key Extraction error. 9504
    By sriram2k7 in forum Open Forum
    Replies: 20
    Last Post: 05-12-2011, 01:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
1e2 Forum