the log looks good....can you describe your symptoms please.
I've yesterday updated my dashboard, so my lite-on 83850c-v1 drive must be flashed to LT+ 1.9
I did everything with JungleFlasher v0.1.84 Beta (250) but it won't work ( i've used LiteOn (Phat)\LiteOn_Post_13141)
so i will post my log maybe some people can help me =(
NOTE: SORRY ABOUT MY BAD ENGLISH
JungleFlasher 0.1.84 Beta (250)
Session Started Wed Jul 06 06:08:13 2011
This is a 32 bit process running on 3 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 1 Com Ports.
Found 3 windows drives C: D: E:
Found 0 CD/DVD drives
Loading firmware file C:\Users\Fducky\Desktop\dummy.bin
MD5 hash: 9203aad0b4ec191cf1f65d22044b8076
Inquiry string found
Identify string found
Drive key @ 0xA030 55AA55AA55AA55AA55AA55AA55AA55AA
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: DVDKey32 extract
Loading firmware file C:\Users\Kibritci\Desktop\LiteOn (Phat)\LiteOn_Post_13141\LTPlus-025v1.9.bin
MD5 hash: 71cfb6569fd42a1d4eb243dbd4d3b159
Genuine LT plus v1.9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.9
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0xE800
Drive returned Status 0x80
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xE800
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xE800
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Drive in Vendor Mode! DVDkey files extraction aborted!
Sending Vendor Outro to port 0xE800
Drive is Lite-On..
Key found in KeyDB at record (1 - Desktop)
Key is: 55AA55AA55AA55AA55AA55AA55AA55AA
Key has been tested and verified, thanks C4eva !
yea, what doesn't work? games don't load, drive doesn't open? check your cables on the drive, make sure you hooked them all up. if it's games, re run through abgx and re burn, especially any ap25 games.
If i insert my game discs , it won't load the game, FIFA 11 etc doesn't need AP25 patch and worked fine always with every modding but now get i only "PLAY DVD" . nothing will work, all my cables are ok everything is fine, but i can't understand why it doesn't work.
try a re flash. you sure you used the right dummy.bin/ if you have any others maybe you mixed them up
DVD Key does not appear to be valid.It shows " 55AA55AA55AA55AA55AA55AA55AA55AA" to be the DVD Key which I beleive is incorrect as it should have some random HexaDecimal Numbers.Check if you have any old DUMMY.Bin or LiteON-OFW.bin saved from previous flash or saved somewhere and use that Dummy.bin or LiteOn-OFW.bin in Source Firmware to spoof the correct DriveKey while choosing Lt1.9 as Target Firmware.Then Proceed with write.
Last edited by Sona; 07-06-2011 at 05:53 AM.
I get an error with LO83info at the second step ( fully open drive). I did everything to get my dummy.bin but it was unsuccessfull. So I've extracted injury.bin key.bin etc from dosflash32 en created my dummy.bin with dvdkey32
I don't know what I can do else with all of this.
What should I do know? And how? I am so confused, so I can't think anymore.
Thanks for the replys and for your help guys.
Last edited by FDUCKY; 07-06-2011 at 08:08 PM.
so if you've got your dummy.bin, just use that in your source and spoof it over to the target. as long as the dummy has your key in it and you didn't save over it w/ the generic FFFFFFFFFFFFFFFF or whatever you should be fine