Announcement

Collapse
No announcement yet.

Flashing Lite-on DG-16D2S from iXtreme 1.5 or 1.51 to 1.6

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flashing Lite-on DG-16D2S from iXtreme 1.5 or 1.51 to 1.6

    Update - This Tutorial will work if you need to upgrade to iXtreme 1.6 Firmware.

    For help on this tutorial, please post questions in this thread.

    general-support/flashing-lite-16d2s-from-ixtreme-t626.html

    So you already have iXtreme firmware 1.5 on your Liteon drive, and need to update to 1.51? It’s not that hard. I did it the night iXtreme 1.51 was released, and it was a pretty easy process. I updated my Liteon DG-162s drive without issues.

    First I recommend download and reading through this PDF - Jungle Flasher 1.51 Tutorial

    Download the iXtreme 1.51

    For this, I still used the CK3 Connectivity kit, which in my opinion, makes it easier for connecting it to the computer, getting the key, etc. However, for updating from 1.5 to 1.51, you don't need a connectivity kit at all, just an FYI.

    If you are using the VIA 6421 card, make sure you remove the drives first. If you don't have a VIA card, no worries. Most new SATA chip sets work fine. Okay, let’s do that. Right Click My Computer, select properties, then click on the Hardware tab.



    Click on “Device Manager” and scroll down to “SCSI and Raid Controller”, click the + sign to expand the list. Right click on your VIA card, and click “Disable”. When prompted with a yes/no message, click yes to disable it.

    Now you have to remove the driver viamraid.sys, which is found in C:\windows\system32\drivers. When you find it, just right click, and delete the file. After you delete it, go back to the device manager, and right click your via card, and enable it. Next, reboot your pc.

    After you have rebooted, go ahead an install the PortIO32 drivers. Just click on PortIO32.exe, which is in the same folder as JungleFlasher ( if you haven’t already downloaded JungleFlasher 0.1.55)

    Another side note, is that JungleFlasher requires the .NET 2.0, get it here.

    Now you can go ahead, and hook up your drive, making sure the drive it’s turned off when you connect it to your pc. Theirs no need to have your PC turned off when you plugin in the SATA cable to your drive.

    Once you have everything hooked up, the first thing is to power on the drive, open the tray, then turn off the power. Next you want to push the drive tray in, half way, then power the drive back on.

    Now you can go ahead, and open up JungleFlasher. When you’re at the main screen, click on the DVDKey 32. Find the correct I/O Port. It should be listed as PLDS DG-16D2S. Just in case your PC freezes during the Erase process, write down with I/O Port your drive is connected to.



    Just press “Dummy from iXtreme” button, and save as prompted. JungleFlasher will prompt you if you want to auto-load the firmware. Make sure your liteon firmware for the drive is placed in the folder “firmware”, which is found in the JunfleFlasher folder.

    [attachment=0:1vr5uvwb]dummy_from_ixtreme.jpg[/attachment:1vr5uvwb]

    Click yes to auto load the firmware. Make sure that everything looks good, that both the source, and target keys are the same.



    When done, click the button, “Save to File”.

    Now, the next phase is to erase the drive. Make sure that you’ve completed all the steps above, you’ve read over the PDF Tutorial, and feel comfortable proceeding.

    During the erase process, if for some reason your PC freezes, don’t worry, you’ll still be able to continue flashing your drive after you reboot.

    Now as long as you haven’t quit or closed JungleFlasher after you got your key, you should be good to go. If you did, make sure you have the correct I/O Port listed. Again, it should be shown as PLDS DG-16D2S. Now, let’s proceed. In JungleFlasher, click on the MTK Flash 32 tab, then click on the Lite-On erase button. Don’t be scared, do it



    When prompted to continue, click yes. You’ll now be presented with another warning message. It’s telling you, that after it’s been erased, you need to power off then on, in a quick cession.



    When you see the following status as shown below, go ahead and power cycle your drive. If for any reason during the erase process, your computer freezes and you start splurring kuss words, no worry, just go ahead an reboot your pc.

    Now your drive is erased, you should be able to see that it is shown under Drive Properties as “Drive in Vendor Mode”

    Oh, if you had to re-boot your pc, lets get you caught up. Go ahead, open JungleFlasher and go to the MTK 32 tab. When there, make sure you drive is powered on, and select the correct I/O Port. It wont say it found anything, so I hope you wrote down what I/O Port you were in. If you didn’t, just go through each one following the next step.

    On the right hand of the screen, there is a Flashing Task section, click on Intro / Devide ID. This will load your erased drive. It took me about 20 minutes after I had to reboot my pc due to it freezing. Just click that button.



    Also, since you had to reboot your pc, you’re going to have to go back to the FirmwareTool 32 tab, load the dummy file, and create your hacked firmware again like in the steps above.

    Now you’re all caught up, lets write to the drive.



    When the process is complete, click the Outro / ATA Reset button, which will then reset your drive, and display it’s properties. To tell you the truth, I don’t think I clicked that button, and mine still worked fine. But for sakes of sanity, click it to be safe.

  • #2
    Re: Flashing Lite-on DG-16D2S from iXtreme 1.5 or 1.51 to 1.

    I can do this with just a SATA cable, right ?

    Comment


    • #3
      Re: Flashing Lite-on DG-16D2S from iXtreme 1.5 or 1.51 to 1.

      Originally posted by djskywalker
      I can do this with just a SATA cable, right ?
      What drive and firmware do you have? Regardless, download JungleFlasher and the tutorial from my sig. Here's the latest firmware (LT+ 1.1): http://www.ixtreme.net/lt-lite-touch...uch-t2485.html.
      Rules to Follow
      JungleFlasher
      JF Tutorial
      ABGX Tutorial
      Flashing in US
      JAWS's For Sale Thread




      Comment


      • #4
        plz reply/help

        Hey Thanks for the article
        Cld u help me with my case ??
        > I still have my xbox on flashed firmware, it was flashed by someone else 1 year ago (i don't knw the version)
        > I have no connectivity tools like the probe,etc & also i don't have my key...( i have not followed your tutorial yet)
        > I have a LiteON drive - 16D2s (dunno the exact version)

        What should I do?? I want to update Dash to be able to play Fifa 12 ! current dash is 2.0.12625.0 !!
        TY !!

        Comment


        • #5
          you need to get all the tools to connect to your pc: 1) via 6421 or x360usb 2) ck3lite or pro with molex power supply and 3)ck3 probe3 (required to get your key off of a liteon).

          once you get these things, connect everything and open JF. Flash the drive to stock and run the update to 13599 from a usb flash drive. Once complete flash again to the latest ixtreme (LTPlus-025v1.91.bin for all liteon drives).

          Also, in the future, go ahead and make your own thread and people will help you there. Thanks.
          XGD3 Quality Benchmarks (per TX and C4):
          PI MAX should be 100 or less & PI Average should be 5 or less
          PIF MAX should be 4 or less & PIF Average should be 0.20 or less
          Nero Discspeed score of 90 or better.

          Jungle Flasher Latest
          Latest iXtreme 3.0 Phat & Slim
          Burner Max Download
          New Xbox Backup Creator & 0800 Firmware
          x360USB Update

          Comment


          • #6
            hi, i am on the latest dash with the latest lt, i paid someone to flash it for me but he gave me a disk with all the info on it, it has all the .bin files, key etc. its a lite on drive, i was hoping you could tell me what i need to do to update to lt 2.0 when its released as i see its coming very soon. i dont need to even open the console do i? i need to go back to stock first tho yeah? any help would be greatly appreciated. thanks.

            Comment


            • #7
              Originally posted by mick500 View Post
              hi, i am on the latest dash with the latest lt, i paid someone to flash it for me but he gave me a disk with all the info on it, it has all the .bin files, key etc. its a lite on drive, i was hoping you could tell me what i need to do to update to lt 2.0 when its released as i see its coming very soon. i dont need to even open the console do i? i need to go back to stock first tho yeah? any help would be greatly appreciated. thanks.
              Hi Mick, I would start a new thread for this you'll stand a better chance of getting answers. You will need to open your console to get the drive out, also you'll need a connectivity kit. You have your .bin files which makes things easier but it also depends on whether its a phat or slim console.

              Start a new thread and we'll get you there.
              "Winter Is Coming!"

              XBOX 360 FLASHING, COUNTY LONDONDERRY, NORTHERN IRELAND only £15!!!

              Forum Rules
              Latest iXtreme LT+ Firmware and 0800 V 3.0 XGD3
              Jungleflasher Tutorial
              New Xbox Backup Creator v2.9 Build 345
              abgx360
              Slicks abgx360 Tutorial

              Stock -> Update -> Flash -> Abgx -> Play

              Comment


              • #8
                I still I have my xbox (phat) flashed the firmware was flashed by another person for 1 year
                > I have connectivity tools, such as probe 3, ck3i, etc and I have not the key ...
                > I have a LiteON drive - (16D2S)

                What should I do? or how I start to get the key?

                Comment


                • #9
                  Originally posted by dubtech29
                  very helpful
                  shouldnt be because no one should be using these anymore


                  Sent from my SAMSUNG-SGH-I777 using Tapatalk

                  Comment

                  Working...
                  X