Announcement

Collapse
No announcement yet.

0225 DG-16D4S Slimkey Failed

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 0225 DG-16D4S Slimkey Failed

    I'm using a VIA VT6421 Win 7 x64 with DSEO/Driver Signature Enforcement Disabled and have deleted viamraid.sys and can recognise my drive through jungleflasher.

    Good drive properties show up, and when I press slimkey, I click no to unlock and then yes to power cycle, perform power cycle but it says slimkey failed.

    Keep getting DVD Key: Not Found and status 0x51 device intro failed.

    REALLY don't wanna buy an x360usbpro because this very same configuration worked with phats.

  • #2
    Originally posted by connorw123 View Post
    I'm using a VIA VT6421 Win 7 x64 with DSEO/Driver Signature Enforcement Disabled and have deleted viamraid.sys and can recognise my drive through jungleflasher.

    Good drive properties show up, and when I press slimkey, I click no to unlock and then yes to power cycle, perform power cycle but it says slimkey failed.

    Keep getting DVD Key: Not Found and status 0x51 device intro failed.

    REALLY don't wanna buy an x360usbpro because this very same configuration worked with phats.
    you wont be able to get past firmguard on a slim 0225 with via chipset, hence the reason for intro/slimkey fail
    you will be stuck on 0x51 and never get the required 0x72
    you can use a alternative usb to sata adaptor to set 0x72 and then hot swop to the via chipset for the dump/write
    however its a bit of a pain to do but not impossible
    http://www.ixtreme.net/ixtreme-lt-li...225-via-2.html
    anything I say is copy and pasted from the jungleflasher tutorial.

    Comment


    • #3
      Originally posted by boneym View Post
      you wont be able to get past firmguard on a slim 0225 with via chipset, hence the reason for intro/slimkey fail
      you will be stuck on 0x51 and never get the required 0x72
      you can use a alternative usb to sata adaptor to set 0x72 and then hot swop to the via chipset for the dump/write
      however its a bit of a pain to do but not impossible
      http://www.ixtreme.net/ixtreme-lt-li...225-via-2.html
      Omg thanks. I am in Scotland and I need someone who is offering a service to flash. Tried contacting Martin C on team xecuter forums but I've had no reply. So is it easier for me to dump drive key with the usb to sata and then for reading and writing use the via? What's the easiest and cheapest solution if I've got an MXIC slim chipset? It's a locked pcb i have.

      http://www.ixtreme.net/ixtreme-lt-li...tml#post278373

      I have remembered this
      Last edited by connorw123; 01-18-2015, 01:53 PM.

      Comment


      • #4
        I only have one ICH7 Motherboard that does dump Slim D4S drive's out of 3 that can flash 360 drive's.

        It's easiest using a USBPRO. If you can get one..

        MXIC are easy to unlock. Just follow the guide in JF.

        PM if you want it done for you at minimum cost.
        http://www.ixtreme.net/downloads-tut...tml#post209529 Using a 360 for flashing

        http://team-xecuter.com/forums/showthread.php?t=61768 Pot Tweaking

        http://www.ixtreme.net/uk-flashing-s...hire-area.html 360 Custom Firmware flashing from £10

        Comment

        Working...
        X