Announcement

Collapse
No announcement yet.

"Flash Name: Unknown type error" when trying to flash drive

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • "Flash Name: Unknown type error" when trying to flash drive

    Hi,

    I am trying to flash my liteon drive (0272 flashed with 1.91), using X360USB, and I keep getting the following properties after Intro/Device ID:
    Code:
    Sending Vendor Intro to port 0x0000
    Serial flash found with Status 0x72
    Sending Device ID request to port 0x0000
    Spi Status: 0x00
    Manufacturer ID: 0x0
    Device ID: 0x0
    Flash Name:  Unknown type
    Flash Size:  n/a
    I have tried power cycling, as suggested in other posts, with no luck. Any ideas on what I need to do to get my drive flashed.

    Note: I have my drive on Vendor Mode but still cannot erase or write to drive. When I do try, I get the errors below:
    Code:
    Unknown flash type Erase aborted !
    Unknown flash type Write aborted !

  • #2
    Are you using an unlocked pcb or the original?
    Give "Thanks" When "Thanks" is Deserved
    The Latest JungleFlasher Download
    If you need your drive flashed for a low price or have any questions, PM me!

    Comment


    • #3
      Originally posted by finfan238 View Post
      Are you using an unlocked pcb or the original?
      Turned out I had to click 'SlimKey' > 'Intro / Device Id' > 'Write'. After that, I was able to see the correct properties and was able to flash the drive.

      Thanks!

      Comment

      Working...
      X