Announcement

Collapse
No announcement yet.

Xkey issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Xkey issue

    Hi,
    I am having a problem using my xkey after flashing my drive to LT3.0.
    I have a phat liteon Dg-16D2 02510C.
    After flashing I then put my Dummy.Bin into jungleflasher source and put the target as the Origi-02510C-1c000.Bin then saved these as firmware.bin on the root of the micro SD Card and placed it in the Xkey. it then loads into passthru mode (even when turned on by the powerbutton) and the disc drive will not open or close. This also happens when the eject key is used to start the xbox.
    I have tried several different firmwares and updated the xkey to the latest firmware.
    Any help is appreciated.
    Cheers,

    - Ben

  • #2
    did you hit spoof source to target? sounds like you missed that part
    Rules To Follow

    ABGX Settings

    CG Pro Gaming Tournaments

    I will no longer help via PM's sorry

    Comment


    • #3
      Sorry, I omitted that part, but yes I did spoof to target. Thanks for your reply

      Comment


      • #4
        send me your JF log
        Rules To Follow

        ABGX Settings

        CG Pro Gaming Tournaments

        I will no longer help via PM's sorry

        Comment


        • #5
          Thanks for your reply,
          I'm not sure if I saved it unfortunately.
          I did actually end up flashing the drive to CF using dos flash as I was having some issues with JF.
          Were you after the log from when I flashed the drive or created the firmware.bin file?
          cheers,
          Ben

          Comment


          • #6
            both would be of help, I would try to create the firmware.bin again using JF dos flash is way outdated
            Rules To Follow

            ABGX Settings

            CG Pro Gaming Tournaments

            I will no longer help via PM's sorry

            Comment


            • #7
              So the Xkey works when the drive is flashed back to stock? Is there a trick to getting it to work on CFW? I'm trying to get it to run games from both the hard drive and from discs

              Comment

              Working...
              X