Announcement

Collapse
No announcement yet.

Liteon iHAS 124 "E" Revision

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Liteon iHAS 124 "E" Revision

    LIGHTNING UK is in the process of testing this burner with the payload and MKM001 and MKM003 disks. You can check his results at the ImgBurn forum. Still work in progress, testing may take several days.

    UPDATE: MKM001 had successful burns at 2.4x, but scans showed poor results. Burns at 4x failed verification.

    http://forum.imgburn.com/index.php?/...d---MKM-001-00

    UPDATE: Looks like we have a winner. MKM003 at 4x scored 91% with DVDInfoPro. Kprobe scan showed slightly high PI average, but nothing Smartburn won't fix. A second test will be forthcoming.

    http://forum.imgburn.com/index.php?/...d---MKM-003-00

    Sent from my Asus Transformer Pad using freakin' Tapatalk 4
    Last edited by RhoTrux64; 09-20-2013, 05:40 PM.
    sigpic

    New to iXtreme.net? Click on the ACHIEVEMENT

    JungleFlasher / Tutorial
    Burner Max Payoad Tool / XGD3 Burning Tutorial
    iXtreme LTPlus Firmware
    ABGX360 /Tutorial

  • #2
    Looks like its enabled!

    He didnt get any good results, but mean it can be used. Hopefully they will stop with the Y and W revision now.
    No Koetjuh, i will not press the thanks button

    2000 posts

    Comment


    • #3
      Originally posted by fatfro View Post
      Looks like its enabled!

      He didn't get any good results, but mean it can be used. Hopefully they will stop with the Y and W revision now.
      Looks promising.

      He hasn't finished testing. Looking at the logs, he starts with FHT disabled, then enables it on the next set of tests. I would expect later test to look better.

      Sent from my Asus Transformer Pad using freakin' Tapatalk 4
      sigpic

      New to iXtreme.net? Click on the ACHIEVEMENT

      JungleFlasher / Tutorial
      Burner Max Payoad Tool / XGD3 Burning Tutorial
      iXtreme LTPlus Firmware
      ABGX360 /Tutorial

      Comment


      • #4
        LIGHTNING UK has finished testing on the Liteon iHAS124 "E". It has been confirmed to work very well with MKM003 and the BurnerMax Payload Tool, which has been incorporated into the latest ImgBurn 2.5.8.0 version. If you would like, you can view his results here: Various Drives - BurnerMAX Payload - MKM-003-00 - Page 2 - Drives - ImgBurn Support Forum
        Last edited by RhoTrux64; 09-23-2013, 10:59 AM.
        sigpic

        New to iXtreme.net? Click on the ACHIEVEMENT

        JungleFlasher / Tutorial
        Burner Max Payoad Tool / XGD3 Burning Tutorial
        iXtreme LTPlus Firmware
        ABGX360 /Tutorial

        Comment


        • #5
          Hi RhoTrux64

          I tried to understand all the info in the post, but i can't.
          Readed a lot of FAQs without lucky

          I have an iHAS 124 E

          I burned 4 DVDs (MKM-003-00) and didn't work.
          Force HT: YES, Online HT: No, OverSpeed: No, SmartBurn: Yes
          BurnerMAX v0.15 activated
          No errors recording

          Could you please give me the right ImgBurn settings to burn XGD3 backups? (according LIGHTNING UK post)
          Is there any way to check the reason the DVDs didn't worked?

          This helps you?

          Información general
          Unidad: ATAPI iHAS124 E
          Firmware: 4L04
          Disco: DVD+R DL (n/a)
          Velocidad seleccionada: Máximo
          PI Errores
          Máximo: 197
          Promedio: 49.42
          Total: 1647293
          PI errores
          Máximo: 2
          Promedio: 0.01
          Total: 2018
          PO errores: -
          Jitter: -
          Estad
          Last edited by orondo; 11-12-2013, 04:23 PM.

          Comment


          • #6
            Scan at 4x, not MAX. Try scanning with Kprobe 2. The score shows 95, which is good. Does it install and play in the Xbox? Or do you get an error on the Xbox? Post a burn log.

            Sent from my ASUS Transformer Pad TF700T using Tapatalk
            Last edited by RhoTrux64; 11-12-2013, 09:05 PM.
            sigpic

            New to iXtreme.net? Click on the ACHIEVEMENT

            JungleFlasher / Tutorial
            Burner Max Payoad Tool / XGD3 Burning Tutorial
            iXtreme LTPlus Firmware
            ABGX360 /Tutorial

            Comment


            • #7
              Thanks for your answer RhoTrux64

              I apologize
              The third ISO i tried, worked perfectly.

              So I think, the other two ISOs were corrupted
              5 DVD in the trash...

              So for anyone who reads this post, my working ISOs were burned:
              LiteOn iHAS 124-14 E
              Verbatim MKM-003-00
              x4
              ImgBurn 2.5.8
              BurnerMAX v0.15 activated
              Force HT: YES, Online HT: No, OverSpeed: No*, SmartBurn: Yes

              *if I put OverSpeed:Yes, ImgBurn 2.5.8 tells me something will go wrong

              Comment


              • #8
                smartburn may make the first few burns a bit bad
                but it learns how to make them better, so they will improve
                the only setting i would change is OHT on,
                please note the settings are different for each system, not just the drive
                what works perfect for one person may be terrible for someone else, even with the exact same settup
                you should tweak the settings to what works best for you

                PS; rhotrux 4000 posts right behind you bud
                Last edited by JAYCE; 11-14-2013, 03:56 AM.
                sigpic

                CG Pro Gaming Tournaments

                the above site is for single xbox live and psn players
                looking to join teams and take part in online battles and tournaments






                Comment


                • #9
                  orondo, can you explain how did you flash the lite on E revision?? I have an 4LO4 and i`m lost... thanks!!!

                  Comment


                  • #10
                    No flashing. Use BurnerMax Payload Tool.

                    Sent from my HTC_Amaze_4G using freakin' Tapatalk 4
                    sigpic

                    New to iXtreme.net? Click on the ACHIEVEMENT

                    JungleFlasher / Tutorial
                    Burner Max Payoad Tool / XGD3 Burning Tutorial
                    iXtreme LTPlus Firmware
                    ABGX360 /Tutorial

                    Comment


                    • #11
                      Help

                      Originally posted by RhoTrux64 View Post
                      No flashing. Use BurnerMax Payload Tool.

                      Sent from my HTC_Amaze_4G using freakin' Tapatalk 4
                      Hi,

                      I recently purchased a liteon iHAS124-14 EU drive to burn xbox 360 back ups after my B revision went bust.

                      I need help as I can't load the burnermax firmware as CDB fails and scanning fails in the log and then the message "thats not enabled YET" pops up.


                      I bought this drive knowing it was an E revision as in your compatibility list it says this will work and be ok.

                      My other alternative was to old school flash it with burner max firmway but the al0s firmware doesn't work with the drive.

                      Can any one suggest another alternative before I have to send the drive back??

                      It would be much appreciated.

                      Comment


                      • #12
                        Originally posted by maackattack View Post
                        Hi,

                        I recently purchased a liteon iHAS124-14 EU drive to burn xbox 360 back ups after my B revision went bust.

                        I need help as I can't load the burnermax firmware as CDB fails and scanning fails in the log and then the message "thats not enabled YET" pops up.


                        I bought this drive knowing it was an E revision as in your compatibility list it says this will work and be ok.

                        My other alternative was to old school flash it with burner max firmway but the al0s firmware doesn't work with the drive.

                        Can any one suggest another alternative before I have to send the drive back??

                        It would be much appreciated.
                        Its in the burnermax compatible list ? :s not to sure then, it should work If its been posted in there but either way your best off just getting a new ihas124b or a Sony Optiarc 5280S-CB Plus which doesn't need the burnermax payload tool or to be flashed with it.

                        Sent from my BlackBerry 9320 using Tapatalk
                        Hit thesigpic if I helped Ill do the same

                        Kollo Pardu - "Guys does anyone know how to get free ps4 or xbox one for free by some lucky chance or something".

                        PS: it should ship to India

                        Kprobe/Nero really isn't needed. If you patch the games in ABGX and burn using a good compatible burner, such as the Sony Optiarc 5280s-cb plus then just install the disc to your HDD 100% without any errors.

                        Comment


                        • #13
                          I don't know why I answered his question he should of made his own post ...... sorry I'm still getting use to tapatalk guys.

                          Sent from my BlackBerry 9320 using Tapatalk
                          Hit thesigpic if I helped Ill do the same

                          Kollo Pardu - "Guys does anyone know how to get free ps4 or xbox one for free by some lucky chance or something".

                          PS: it should ship to India

                          Kprobe/Nero really isn't needed. If you patch the games in ABGX and burn using a good compatible burner, such as the Sony Optiarc 5280s-cb plus then just install the disc to your HDD 100% without any errors.

                          Comment


                          • #14
                            How to burn XGD3 Games on RITEK-04-66 with iHas124 Revision E with 2,4x speed

                            Hi @ all,

                            First of all sorry for my english

                            I purchased a Lite-On iHAS124 Revision E.
                            My Drive ist BurnerMax Payload Tool enabled.
                            Ive a Xbox 360 with Benq Drive.

                            Iam using Platinum DVD+R DL Media-ID is: RITEK 04-66.
                            XGD2 Games burned with this drive working fine.
                            One XGD3 game Ive burned works in my console but installing the game crashes at 32%.
                            My second XGD3 game crashed at burning process.

                            Ive read that, the reason could be the burn speed (my drive burns with minimum 4x).
                            Also ive read that it is possible to change the MediaID List from the Burner to 2,4x.
                            But is this possible with my drive (Revision E) too?

                            Thanks.

                            Comment


                            • #15
                              Originally posted by Chris446 View Post
                              Hi @ all,

                              First of all sorry for my english

                              I purchased a Lite-On iHAS124 Revision E.
                              My Drive ist BurnerMax Payload Tool enabled.
                              Ive a Xbox 360 with Benq Drive.

                              Iam using Platinum DVD+R DL Media-ID is: RITEK 04-66.
                              XGD2 Games burned with this drive working fine.
                              One XGD3 game Ive burned works in my console but installing the game crashes at 32%.
                              My second XGD3 game crashed at burning process.

                              Ive read that, the reason could be the burn speed (my drive burns with minimum 4x).
                              Also ive read that it is possible to change the MediaID List from the Burner to 2,4x.
                              But is this possible with my drive (Revision E) too?

                              Thanks.
                              Have you tried running your burns through kprobe to see what the results are? I wouldn't imagine they would be great with media you are using.

                              Comment

                              Working...
                              X