iXtreme LT+ Lite Touch Xbox 360 Drive Firmware Flashing
Results 1 to 8 of 8
  1. #1
    Learning the Ropes
    Join Date
    Oct 2009
    Posts
    75
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    1) not sure if this is a major issue or not but when i open JF i get the message "No comports were found during enumeration"

    I've made sure PortIO 32 is install correctly, I've disabled the VIA card and removed the drivers then gone back and enabled it.

    I have also tried starting all over again and put the drive in half open mode.

    2)From here i hit the DVDKey 32 tab choose "dummy.bin only" make sure the port is correct and it picks up the drive, hit "Dummy from IXtreme" and save the file.

    When JF prompts me and asks if i want to auto load the FW i hit yes (the fw is in the firmware folder of JF) i then get the error "cant open file C users .......\ix16-liteon.bin"

    From the FirmwareTool 32 tab the Source data all look good so i open the target firmware and choose the 1.61 but the drive key shows as "55AA55AA55AA55AA55AA55AA55AA55AA"

    Below is the log from JF
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    JungleFlasher 0.1.67 Beta
    Session Started Mon Dec 28 20:20:59 2009

    This is a 32 bit process running on 2 x 32 bit CPUs
    PortIO is installed and running.
    Found 9 I/O Ports.
    Found 0 Com Ports.
    Found 8 windows drives C: D: E: G: H: I: J: Z:
    Found 2 CD/DVD drives D: E:

    Sending iXtreme DVDkey request to port 0xC880

    Extracted drive key - REMOVED

    iXtreme v1.60-12x-

    0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
    0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
    0020: 37 34 38 35 30 43 41 30 - 41 32 44 36 30 38 43 47 74850CA0A2D608CG
    0030: 39 31 38 39 31 36 30 35 - 30 48 46 20 20 20 00 00 918916050HF ..
    0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    0010: 00 00 00 00 44 36 30 38 - 43 47 39 31 38 39 31 36 ....D608CG918916
    0020: 30 35 30 48 46 20 20 20 - 00 00 00 00 00 00 34 37 050HF ......47
    0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
    0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
    0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
    0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
    0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
    0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
    00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00B0: 20 20 00 00 ..

    0000: 44 36 30 38 43 47 39 31 - 38 39 31 36 30 35 30 48 D608CG918916050H
    0010: 46 20 20 20 FF FF FF FF - 39 44 32 34 31 32 33 32 F ....9D241232
    0020: 31 36 44 31 31 34 58 58 - 41 30 FF FF 53 34 50 39 16D114XXA0..S4P9
    0030: 34 32 33 30 30 30 30 30 - 30 31 32 34 33 33 00 00 42300000012433..
    0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..


    Dummy.bin file saved to C:\Users\Nick\Desktop\JungleFlasher v0.1.67 Beta (50)\firmware\Dummy.bin

    Loading DVDkey source file
    Inquiry string found
    Identify string found
    DVD key found @ 0xA030 key is REMOVED
    Firmware is a Lite-On Dummy OSIG:
    Firmware type is: iXtreme v1.60-12x-

    Key database updated
    Loading target file C:\Users\Nick\Desktop\JungleFlasher v0.1.67 Beta (50)\firmware\ix161-748.bin
    Target File MD5 hash is: d9b4a4b8c668e28268066ce639e9866e
    Inquiry area found
    Current DVD key is 55AA55AA55AA55AA55AA55AA55AA55AA
    Firmware is a Lite-On encrypted iXtreme OSIG: PLDS DG-16D2S 7485
    Firmware type is:
    Any ideas ?

    Cheers in advanced !

  2. #2
    Newbie
    Join Date
    Dec 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    Try to rename the file in the firmware folder to: ix16-liteon.bin. (Probabily the actual name is ix161-748.bin, then rename to ix16-liteon.bin)

  3. #3
    Learning the Ropes
    Join Date
    Oct 2009
    Posts
    75
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    Already tried that. didn't work came up saying the HEX check was invalid or something like that

  4. #4
    bro
    bro is offline
    Newbie
    Join Date
    Nov 2009
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    I have problem when writing flash to drive. JF just freeze. Any idea?

  5. #5
    Newbie
    Join Date
    Dec 2009
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    I had a same problem of NICO_11, HEX check was invalid!!

  6. #6
    A Helping Hand
    Join Date
    Oct 2009
    Posts
    23
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    Well you have to press the "spoof source to target button" and ur source key will be copied on ur target key field

  7. #7
    Newbie
    Join Date
    Dec 2009
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    i find a solution to my problem, just use older version of jungleflasher in my example i used jungleflasher 1.55 and i flash 2 lite ons one with 1.61 and one with nonstealth. hope it will be a solution to others who had the same problem with mine

  8. #8
    Newbie
    Join Date
    Dec 2009
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Issues upgrading to Lite-On 1.61 from 1.6 - 74850C

    Works Fine!!! Firmware 1.61 Installed!!! i have only one problem with old game patched wave 2 using ppf-o-matic with patch v14-15.ppf
    To run this game i must use the activate.iso. It's only my problem??

 

 

Similar Threads

  1. Lite-on 74850C issues
    By bender6681 in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 5
    Last Post: 09-19-2011, 10:14 AM
  2. Upgrading to LT from IXtreme 1.6 or 1.61 Lite-On 74850C
    By Nico_11 in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 8
    Last Post: 03-11-2011, 04:55 AM
  3. Upgrading from LT to LT+ (Lite-on 74850C)
    By mapleleafs89 in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 6
    Last Post: 12-27-2010, 01:43 PM
  4. (SOLVED) Lite-on 74850c upgrading from 1.5->1.6
    By AeoN909 in forum Archived iXtreme 1.61 Flashing Support
    Replies: 7
    Last Post: 11-13-2009, 03:21 PM
  5. Upgrading to LT from IXtreme 1.6 or 1.61 Lite-On 74850C
    By Nico_11 in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 1
    Last Post: 12-31-1969, 06:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top
1e2 Forum